This guide rail forming machine shapes metal strip into guide profiles for roll-up doors. Guide hole positions accommodate brackets, head stops and latches. A supported roller outfeed keeps the formed guides accessible for inspection and handling.
The Roll-Up Door Guide Rail Forming Machine produces the metal guide profile used at the sides of a roll-up door opening. As strip travels through successive roll stands, the tooling shapes it into the required channel. The finished profile moves onto the roller outfeed, where operators can examine its shape and hole positions.
Guide hole positions correspond to the mounting points for brackets, head stops and latches in the door assembly.
Feed and guide the strip. Material enters the roll forming line according to the selected guide profile and tooling setup.
Form the profile. Successive roll stands bend the strip into the guide channel. Hole positions are planned against the bracket, head-stop and latch arrangement.
Support and inspect the guide. Formed guides travel onto the roller outfeed for checking before the next production step.
A series of roll stands shapes metal strip into a consistent guide profile.
Guide hole positions accommodate brackets, head stops and latches in the door assembly.
A roller run-out supports the long profile as it leaves the forming section.
Forming speed is 4 m/min and adjustable to suit the production setup.
Guides locate the door curtain along the sides of the opening. This machine makes the guide profile; matching brackets, head stops and latches are fitted or assembled in later steps.
The guide rail is mounted at the side of a roll-up door opening and helps guide the curtain as it moves.
Guide hole positions correspond to brackets, head stops and latches in the roll-up door assembly.
Yes. The operating speed is 4 m/min and can be adjusted to suit the forming setup.
Send the guide profile drawing or sample, required guide length, hole positions, target production capacity and factory power supply so we can confirm the line configuration.