This cordless riveter is designed for joining roll-up door barrel bodies and end plates. Interchangeable dies support different joining tasks, while the 18 V lithium-ion battery allows flexible use around the workshop and on site.
The Cordless Multi-Function Riveter is a handheld joining tool for roll-up door barrel assembly. Its C-shaped head positions opposing dies around the joint, allowing the operator to work along the edge of a cylindrical barrel and end plate.
The battery-powered design lets operators move between joining positions without a power cable attached to the tool. The supplied photos show the riveter, a battery, charger and die accessories; confirm the exact package contents and required dies when ordering.
1. Select the dies. Choose a die set that matches the fastener, joint drawing and materials being assembled.
2. Position the parts. Fit the end plate to the barrel body and place the C-shaped head around the specified joining point.
3. Make and inspect the joint. Operate the tool at each required position, then check the result against the assembly drawing.
The 18 V, 4.0 Ah lithium-ion battery supports work around the workshop and on site.
The stated maximum force is a reference when selecting the tool for a specified joint.
Die sets can be changed for different riveting or pressing tasks, subject to the joint and tooling.
Opposing dies can be positioned around the edge of a barrel and end plate.
| Specification | Details |
|---|---|
| Product type | Cordless multi-function riveter |
| Maximum force | 80 kN |
| Battery | 18 V, 4.0 Ah lithium-ion |
| Tooling | Interchangeable dies |
| Stated use | Riveting and pressing the barrel body and end plate together |
Die sizes, compatible fasteners, stroke, charger input and package contents should be confirmed for the selected joint.
This riveter is used during barrel assembly, after the cylindrical barrel body and end plate have been prepared. The joining method and die set depend on the barrel drawing, end plate, and fastener or pressing operation. Barrel forming, door curtain production and final door assembly are separate steps.
It has interchangeable dies, but each die set must match the fastener, material and joint geometry. Send a drawing or sample for a tooling review.
80 kN is the stated maximum force. Suitability for a particular joint depends on the dies, material and assembly requirements.
The supplied specification lists an 18 V, 4.0 Ah lithium-ion battery. Charger input and battery quantity can be confirmed in the quotation.
These accessories appear in the supplied photos. Confirm the exact package contents and die sizes before ordering.
Send the barrel and end-plate drawing, material and thickness, fastener or joint requirements, production volume and factory power supply. A finished joint sample is also useful for checking the tool and die configuration.