With our loaded practical experience and thoughtful solutions, we now have been identified for a trusted provider for numerous intercontinental consumers for 16x7 Insulated Garage Door, Garage Door Window Frame, Rolling Door Spring Clamp, We sincerely do our greatest to supply the very best support for every one of the purchasers and businessmen.

---

OEM/ODM Manufacturer Garage Door Torsion Tube Shaft - .218 x 2″ x 28″ Garage Door Torsion Springs – Bestar Detail:

USA Standard Garage Door Springs in Production

Torsion springs, with standard inner diameter sizes of 1.75 and 2.00 inches, are used to counter balance and assist in the opening and closing of your garage door.

We supply Garage Door Torsion Springs in 1.75” and 2” diameters in multiple wire sizes ranging from 0.207, 0.218, 0.225, 0.234, 0.243, 0.250, 0.262 to 0.272. All our Torsion Springs are manufactured from high-tensile, oil-tempered spring wire, meeting ASTM A229.

 

Standard Features:

(1) 0.218 in. wire size x 2 in. I.D. x 28 in. L with white color coding

(2) High-tensile and Oil-tempered Spring Wire

(3) Rated for 10,000 to 15,000 Cycles

 

How To Measure Garage Door Springs?

To measure the torsion springs, follow each of the following four steps carefully. If the garage door has two springs measure each spring individually.

(1) Measure Torsion Spring Wire Size

(2) Measure Torsion Spring Inside Diameter

(3) Measure Torsion Spring Length

(4) Wind of Torsion Spring

 

Garage Door Torsion Springs FAQs

 

How Do Garage Door Torsion Springs Work?

Torsion springs are normally mounted horizontally above the opening of your garage door. When you pull the door down, cables attached to the bottom corners actually force the springs to wind up, in turn energizing the system. When you open the door, the springs then unwind and their energy transfers to the door, helping it to lift up and making it easier to open.

 

Garage Door Torsion Spring Lifecycle

As the door is opened and closed over time, the steel in the springs can start to weaken as the door gradually becomes too heavy for them, rendering them less effective. The springs will eventually break, leaving the door closed. Torsion springs can also be affected by rust and cold weather. The average garage door torsion springs will last somewhere between 5-7 years, and should last around 10,000-15,000 cycles. So, if you open and close your garage door 3-5 times a day for over 365 days in a year, you should get plenty of life out of your torsion springs.

 

Garage Door Torsion Spring Repair

We strongly recommend that you ask a professional for this job. Many people are seriously injured every year as a result of attempting this repair without proper training and equipment. It is essential to have the right tools and know how to do the job safely.

 

---

Product detail pictures:




Related Product Guide:

---

We've got quite possibly the most state-of-the-art production gear, experienced and qualified engineers and workers, acknowledged top quality handle systems along with a friendly expert gross sales group pre/after-sales support for OEM/ODM Manufacturer Garage Door Torsion Tube Shaft - .218 x 2″ x 28″ Garage Door Torsion Springs – Bestar, The product will supply to all over the world, such as: Malawi, Korea, Canberra, We warmly welcome you to come to visit us personally. We hope to establish a long-term friendship based on equality and mutual benefit. If you want to get in touch with us, please do not hesitate to call. We will be your best choice.