Our commission should be to provide our end users and clients with very best excellent and aggressive portable digital products and solutions for 10x8 Roll Up Door, Garage Door Side Seal, Roller Shutter Garage Doors, We are willing to give you the lowest price in the market, best quality and very nice sales service.Welcome to do bussines with us,let's be double win.

---

Manufacturer of 16×7 Garage Door - .218 x 2″ x 28″ Garage Door Torsion Springs – Bestar Detail:

USA Standard Garage Door Springs in Production

Torsion springs, with standard inner diameter sizes of 1.75 and 2.00 inches, are used to counter balance and assist in the opening and closing of your garage door.

We supply Garage Door Torsion Springs in 1.75” and 2” diameters in multiple wire sizes ranging from 0.207, 0.218, 0.225, 0.234, 0.243, 0.250, 0.262 to 0.272. All our Torsion Springs are manufactured from high-tensile, oil-tempered spring wire, meeting ASTM A229.

 

Standard Features:

(1) 0.218 in. wire size x 2 in. I.D. x 28 in. L with white color coding

(2) High-tensile and Oil-tempered Spring Wire

(3) Rated for 10,000 to 15,000 Cycles

 

How To Measure Garage Door Springs?

To measure the torsion springs, follow each of the following four steps carefully. If the garage door has two springs measure each spring individually.

(1) Measure Torsion Spring Wire Size

(2) Measure Torsion Spring Inside Diameter

(3) Measure Torsion Spring Length

(4) Wind of Torsion Spring

 

Garage Door Torsion Springs FAQs

 

How Do Garage Door Torsion Springs Work?

Torsion springs are normally mounted horizontally above the opening of your garage door. When you pull the door down, cables attached to the bottom corners actually force the springs to wind up, in turn energizing the system. When you open the door, the springs then unwind and their energy transfers to the door, helping it to lift up and making it easier to open.

 

Garage Door Torsion Spring Lifecycle

As the door is opened and closed over time, the steel in the springs can start to weaken as the door gradually becomes too heavy for them, rendering them less effective. The springs will eventually break, leaving the door closed. Torsion springs can also be affected by rust and cold weather. The average garage door torsion springs will last somewhere between 5-7 years, and should last around 10,000-15,000 cycles. So, if you open and close your garage door 3-5 times a day for over 365 days in a year, you should get plenty of life out of your torsion springs.

 

Garage Door Torsion Spring Repair

We strongly recommend that you ask a professional for this job. Many people are seriously injured every year as a result of attempting this repair without proper training and equipment. It is essential to have the right tools and know how to do the job safely.